Message posted by *EJ* on February 08 10 at 9:38am - IP Logged
*EJ*
Forum Moderator
January 19 04
487 Posts
The 0W20 works well in hot climate for stock engine.
We recommend the 10W30 when using nitrous.
Message posted by Rif Raf Racing on February 14 10 at 11:20am - IP Logged
Rif Raf Racing
Platinum Member
United States
September 13 08
18 Posts
so the "less than 0w" is what you are suggesting for stock engine in cool climate.I see it refered to as 0w but it is called" less than 0w"when I went to order it.
Message posted by *EJ* on February 15 10 at 12:36pm - IP Logged
*EJ*
Forum Moderator
January 19 04
487 Posts
That is correct.
Message posted by QtrMileHuslr on February 22 10 at 10:04pm - IP Logged
QtrMileHuslr
Platinum Member
United States
February 08 08
69 Posts
During the summer around the D.C.,MD.,VA. area during the summer the avg. temp. would be 90-95 degrees. Is that too high of temp. to run the >>0 Alisyn oil for the track ?
----------------- Get N Where U Fit N
Message posted by *EJ* on February 23 10 at 8:47am - IP Logged
*EJ*
Forum Moderator
January 19 04
487 Posts
I run the less than zero with Petron additive in my 08 Busa on the street and track in Ohio with no problems.
If you don't feel comfortable with the <<0 the 0W20 works great in hot climates.
Message posted by QtrMileHuslr on February 23 10 at 5:51pm - IP Logged
QtrMileHuslr
Platinum Member
United States
February 08 08
69 Posts
Thanks again EJ!
----------------- Get N Where U Fit N
Message posted by beefcake on June 08 10 at 11:22pm - IP Logged
beefcake
Platinum Member
United States
March 30 03
53 Posts
being as i'm in the same climate as you guys, would you say the 0w for a piped, pc'd 08?
----------------- 08' Black / Orange Busa - Sidewinder / PC3 / Air Shifter / 65"
Cincinnati, OH
Message posted by *EJ* on June 09 10 at 5:15pm - IP Logged
*EJ*
Forum Moderator
January 19 04
487 Posts
beefcake,
use the 0W20 with the petron additive
Message posted by beefcake on June 09 10 at 5:23pm - IP Logged
beefcake
Platinum Member
United States
March 30 03
53 Posts
Quote: Originally posted by *EJ* on June 09 10
beefcake,
use the 0W20 with the petron additive
would i order this from your site, or is it something i can pick up at the bike shop by my dealership?
----------------- 08' Black / Orange Busa - Sidewinder / PC3 / Air Shifter / 65"
Cincinnati, OH
Message posted by *EJ* on June 09 10 at 5:47pm - IP Logged
*EJ*
Forum Moderator
January 19 04
487 Posts
not sure if anyone else sells the Alisyn oil and Petron, you can order from our website or call at 937-912-0054 Mon. - Fri. 8:00am to 5:00pm EST
Message posted by busa3573 on June 16 10 at 10:35am - IP Logged
busa3573
Platinum Member
February 09 10
3 Posts
I was wondering what yall thought of the torco 5w 30 oil full synthentic? sr-5? was that good oil to run?
----------------- I live my life one quarter mile at time!!
Message posted by *EJ* on June 16 10 at 11:11am - IP Logged
*EJ*
Forum Moderator
January 19 04
487 Posts
busa3573,
We have not tested the Torco. The Alisyn we use with Petron additive makes great power and works well with the clutch fibers.
Message posted by Quan on June 27 10 at 7:34pm - IP Logged
Quan
Platinum Member
September 22 09
8 Posts
was wondering would the alyusium O weight oil be good for my setup 05 busa 30 dry shot brocks exhaust mrxo1 fuel an this hot geoigia heat or what oil would you recommend an how many quarts doing a lot of dragrace but i street ride to
----------------- 05busa 30shot of nos
Message posted by *EJ* on June 28 10 at 10:10am - IP Logged
*EJ*
Forum Moderator
January 19 04
487 Posts
Quan,
we suggest the 0W20 in the heat.
Message posted by maxumis on July 18 10 at 9:41am - IP Logged
maxumis
Platinum Member
June 29 10
15 Posts
just wandering if the 0-20 is good for lap dashing in a hot climate.
----------------- live once enjoy it
Message posted by Steve Syx on July 19 10 at 11:57am - IP Logged
Steve Syx
Forum Moderator
May 14 07
194 Posts
Yes, it would be fine.
Message posted by NightRacer on August 07 10 at 8:21pm - IP Logged
NightRacer
Standard Member
United States
August 07 10
1 Posts
is anyone using quakerstate 10w30 or 10w40 conventional car oil for racing or on the street?..if so how often are you changing it out? is it just for break in or general use?
Message posted by tommy2671 on August 08 10 at 7:59am - IP Logged
tommy2671
Forum Moderator
United States
July 26 04
486 Posts
I only use conventional oils for engine break in! Full synthetic after, Alyson or Motul.
----------------- 2006 gsxr1000 (ALL BROCKED OUT)
If you wish to post a reply to this thread you must first Login
If you are not already registered you must first register