Brock's Performance

Search Results
You searched for "lever,"

13 FAQs Found
Page 1 of 2
My Suzuki GSX-R1000 (Or Hayabusa) misses and stalls abruptly when I pull the clutch lever in – Do I need a Map? Is my Power Commander bad?
 
Clutch mod and HD springs: I have both in my Suzuki GSXR 1000 05". What I need help with is the clutch adjustment after both are installed. I see there are 3 adjustment areas; 1) the lever 2) the clutch release adjuster cap 3) and the clutch cable adjuster under the tank. How should all three be adjusted for the correct setting? Here is what I've noticed, when I leave free play at the lever it's hard to engage the gears but when it's tight at the lever it's no problem. I've followed your instructions to the tee and still it boggles me. I guess I don't know what I should expect with having your mods in there. Also where should the clutch start to grab? Very soon from the handle or in the middle? This has been racking my brain since I've owned the bike.
 
I have installed the Ultra Clutch Mod, and at first it seemed like the clutch was engaging at the half way point of clutch lever, but after a couple of hard launches it seems to be engaging more towards the almost full out. How do I set the clutch at the adjuster and know its right?
 
Is it possible to turn the 2008 GSXR-1000 into a cable instead of hydraulic clutch using the 2006 front sprocket cover, clutch lever, and clutch cable?
 
I have a 2007 gsxr 1000, Brock's clutch mod I have 2 clutch cushions, am I supposed to use them or just hyperplate? I have to let the clutch lever about half way out with no slipping and I would like to have it closer.
 
I've ordered and installed your clutch cushion mod for the 01-04 GSX-R1000. Would it defeat the purpose if I put the cushion in but left the stock springs in? With all 5 of the HD springs in the clutch lever it is very difficult to pull in, especially in traffic. Im not that big of a guy, at only 130lbs fully suited.
 
I have a 2006 GSX-R1000 and it has the 04 clutch (5 springs) with the stiff blue springs in it. Can I purchase the yellow 05/06 springs and put them in to make the clutch lever softer, because the blue ones are very stiff. Just want to know if it fits before I order them.
 
I just put an Ultra Clutch Mod in a 08 GSX-R1000. The lever releases too close to the bar. It rides like a dirt bike, two fingers on bar, two on lever. What can I do to make it release further out?
 
I purchased your cushion kit for my mk1 bandit,with gsxr clutch fitted. In my current configuration I have my lock up set to throw the lever. Should I just stay with the same static pressure (ie not use springs supplied)?
 
What if the lever cam which came with my clutch cushion kit does not work with my aftermarket levers?
 
Go to Page :

Can't Find an Answer?
If you cannot find an answer to your question, you can submit it to us and receive an answer by e-mail.

Back to Top